The hottest Shenzhen jieshengda Technology launche

Shenzhen jieshengda Technology launched three in and three out 4

Product Size: 115x100x23mm

high precision Ma signal isolator is welded on PCB board and din35 guide rail installation. The guide rail installation can realize analog signal one in and one out | one in and two out | two in and two out | one in and three out | three in and three out | one in and four out and other functions. Users can use it very conveniently by wiring according to the instructions. The above focuses on the introduction of three in and three out. Some respondents put forward different opinions | the characteristics and model selection of one in and four out isolators. The three in and three out signal isolation transmitter is now on the market. Welcome new and old customers to inquire

product overview of three input and three output Ma signal isolation transmitter:

three input and three output signal isolation transmitter is a signal conditioner that converts, amplifies and isolates analog signals electrically insulated between input and output, receives various analog signal inputs of field instruments, and performs signal transformation and conditioning through analog signal isolation transmitter, It is transmitted to the control room, PLC, PC and DCS system in the form of standard analog signal or special analog signal specified by the user. The input, output and working power supply of this product are isolated from each other. New isolation measures are adopted to not only isolate the input, output and working power supply, but also isolate each channel of this product from each other. The isolation voltage is as high as 2500vdc. This product is widely used in industrial field, power monitoring, medical electronic equipment, analog signal isolation and acquisition of power isolation and measurement. The analog signal isolation transmitter adopts electromagnetic isolation technology. Compared with the optocoupler signal isolation transmitter, it has better output accuracy, small temperature drift characteristics and good linearity. It is suitable for vibration and wet industrial sites. The standard din35mm guide rail installation method is convenient for users to install

three in three out Ma signal isolator product features:

● ultra thin volume, low cost, standard DIN, so the price of hydraulic type is at least 10000 yuan higher than that of lever, almost 35mm. Rail installation method

● three end isolation (input, output and working power supply are separated from each other)

● three channel input and three channel output, Mutual isolation between channels

● high accuracy level (0.1% F.S)

● high linearity (0.1% F.S)

● high isolation withstand voltage (2500vdc/60s)

● very low temperature drift (35ppm/℃)

● industrial temperature range (-45~+85 ℃)

● reliable product performance (MTBF> 500000 hours)

● working power supply (5vdc/12vdc/drop $0.096/ton (15 ⑴)(80000 tons); South Africa to China 6 (7) dollars/ton (15 (1) 80000 tons); Iran to China 11.5 ⑴ 2.5 US dollars/ton (20.3 million tons) 15vdc/24vdc single power supply and other options)

● international standard signal input and output (0~5v/0~10v/1~5v/4~20ma/0~20ma and other

ma signal isolator selection examples:

example 1: input channel 1:ma; output channel 1:ma; working power supply: 24VDC; "model: din35 1x1 mi-i4-p1-io1

example 2: input channel 1:ma; output channel 1:ma; output channel 2:ma; working power supply: 24VDC; model: din35 1x2 mi-i4-p1-io1

example 3: DC.Input channel 1:ma; output channel 1:ma; output channel 2:ma; Working power supply: 24VDC; Model: din35 1x2 mi-i4-p1-io1

example 4: input channel 1:ma; Input channel 2:ma; Output channel 1:ma; Output channel 2:ma; Working power supply: 24VDC; Model: din35 2x2mi-i4-p1-io1

example 5: input channel 1:ma; Output channel 1:ma; Output channel 2:ma; Output channel 3:ma; Working power supply: 24VDC; Model: din35 1x3 mi-i4-p1-io1

example 6: input channel 1:ma; Input channel 2:ma; Input channel 3:ma; Output channel 1:ma; Output channel 2:ma; Output channel 3:ma; Working power supply: 24VDC; Model: din35 3x3 mi-i4-p1-io1

Example 7: input channel 1:ma; Output channel 1:ma; Output channel 2:ma; Output channel 3:ma; Output channel 4:ma; Working power supply: 24VDC; Model: din35 1x4 mi-i4-p1-io1